iPhone 5S Touch Screen Problem Solution Download upport Support Solution
- The very first thing that you need to do is to unplug, clean and
reconnect touch screen connector strip and check, in most cases this has
found to be a good and effective solution of this problem.
- If the above step fails then look for any traces of water damage on
your iPhone 5S motherboard. In case you find that then properly clean
the entire board and also use a heat gun for a few seconds so that there
are no traces of water left behind. This is also a one effective
solution for that and any phone that has touch screen problem due to
water or moisture is able to overcome this type of problem.
- Now check whether touch screen connector is loose when connected
with on-board connector or not, in case it is then all you have to do is
to replace display screen and check.
- Now re-solder on-board connector and check.
- If everything else fails then gently heat Touch IC. If the touch
screen is faulty replace it, as you don’t have any other option left
than that.
0 comments:
Post a Comment