Welcome to Octoplus/Octopus Box Samsung software version 2.4.3
-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Press Home button.
9. Go to dial window.
10. Enter "*#9090# or *#0808#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-J710F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM27
Selected model: SM-J710F
Please, press "OK" button on the phone to allow USB debugging..
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-J710F
Firmware compiled date: Fri May 6 14:09:43 KST 2016
PDA version: J710FXXU1APE1
CSC version: J710FOJV1APE1
SW version: J710FXXU1APCD
Phone SN: RF8H521WGZD
Android version: 6.0.1 (MMB29K)
Sales code: XSG
Country: UAE
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Codename: j7xeltexx
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung
\BACKUP\Security-SM-J710F-Unknown20-11-2016_09-17-53-.asec file
Initializing exploit...
Executing exploit...
Exploit has been executed successfully
Unlocking phone...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.4.3 Software version.
0 comments:
Post a Comment